Full Insulation Package to achieve 0.15 U-value

SuperQuilt Triple Layer 0.15 Roof System

Achieve a 0.15 U-value for Pitched and Flat Roofs! Hit building regulations without the requirement for Rigid Board Insulation. This complete package will save on time, cost and labour time – No Cutting Boards!

SuperQuilt is the UK’s thermally highest performing multifoil, and is fully accredited by BDA and BBA. When SuperQuilt is fully taped and sealed with Thermaseal Foil Joining Tape, it will also work as a high performing Vapour Control Layer, eliminating condensation.

A main benefit of the Triple Layer system is that this can be installed with very slim rafters or joists, as little as just 100m!

Why 0.15 U-value?

Achieving a U-value of 0.15 is a common target if the project is an extension or refurbishment, for both Pitched and Flat Roofs.

Want to look at other methods to hit 0.15? View our informative blog HERE.

Multifoil Insulation’s 3 Layer Kit Consists of the following;

• SuperQuilt 1.2m x 10m (Triple Layer)
• Adequate Thermaseal Foil Joining Tape
• Free Heavy Duty Staple Gun & 5,000 Staples (24m² or MORE)

SuperQuilt Triple Layer 0.15 Roof System is accessible on our Online U-value Calculator. Our Free and Instant calculator will give you results in just 60 seconds! You are then able to pass the document onto building control for acceptance.

YBS SuperQuilt LABC Certificate is available at the following link – Click Here!

We recommend to have a layer of SuperQuilt recessed. The alternate two layers are to be fitted taut below or above rafters. It is essential to have air cavities above and below SuperQuilt, as this allows the product to expand and reflect.

Please note, the coverages are based on the physical roll dimensions – You may consider sizing up for any overlaps & recesses.

Delivery Schedule

Order online for Free Next Working Day Delivery (when ordered before 2pm). – Bulk discounts available on large quantities, contact our Trade Sales Manager today on 0114 323 0012.