Campervan Conversion Insulation Kit
Campervan Conversion Insulation Kit
Key Features
- Flexible and Easy to Install
- Retains valuable space
- Highly Reflective Outer Layers
- Air Bubble Membrane
- Regulate the temperature inside your van
- High Performing Vapour Control Layer
- Prevents mould and mildew growth
- Lightweight and durable
- Reflects heat away during the summer
- Traps the warmth in during winter
- Reduce noise and vibrations
- No harmful fibres / No PPE required
- Manufactured in the UK
Convert your van with our Insulation Kit
One of the first steps in you campervan conversion journey is to insulate it. Insulation is crucial for creating a comfortable living space in your van, regardless of what the weather conditions may be which is why we created the campervan conversion insulation kit.
Our multifoil insulation regulates the temperature, inside your van. It has a unique construction; it is manufactured from True Aluminium Foil, which are sandwich around an insulating air bubble membrane.
When it comes to insulation, especially for a camper, where you are tight for space – there’s nothing quite like multifoil insulation. You can enjoy all the benefits of insulation without sacrificing precious space in your camper van. At the same time, it is also lightweight and easy to install too!
When the Multifoil Insulation has been installed and you have Taped and sealed all around the joints and the edges with the Thermaseal Foil Joining Tape – you will also prevent condensation build up which often leads too mould and mildew growth.
So, what’s included in our Campervan Conversion kit?
- AirTec Double Insulation 1.2m x 25m (30m2)
- ThermaSeal Foil Joining Tape 75mm x 50m
- 2 x ThermaSeal Double Sided Tape 50mm x 33m
- Multifoil Cutting Knife
- Free Next Working Day Delivery to any UK Mainland address
or
- AirTec Double Insulation 1.5m x 25m (37.5m2)
- 2 x ThermaSeal Foil Joining Tape 75mm x 50m
- 3 x ThermaSeal Double Sided Tape 50mm x 33m
- Multifoil Cutting Knife
- Free Next Working Day Delivery to any UK Mainland address
If you order before 2pm your order will be delivered to any UK Mainland address the following working day.
If you would like more information, or if you have any queries – please just get in touch.
| Width | 1.2m or 1.5m |
| Length | 25m |
| Thickness | 4mm |
| Weight | 200g per m² |
| Foil Emissivity | 0.05 |
| Reflectivity | 95% |
| Water Vapour Resistance | 600MNs/g |
Do I need to tape and seal?
We advise taping and sealing all of the joints and the edges. This will prevent any condensation build up, which can result in mould. You will create a high performing vapour control layer by taping and sealing all of the joints.
What do I do about the cables? Can I insulate over the top?
So long as the cables are not in direct contact with multifoil insulation, its ok to have the cables underneath. You could always encase them in trunking for extra protection. If you need to pull the cables through the insulation, that is also ok – just ensure you tape and seal around where you have cut.
Is this product perforated?
This product is un-perforated. It works instead as a vapour control layer. Once you have taped and sealed this with the Thermaseal Foil Joining Tape Provided – you will prevent passage of moisture. This will in turn remove the risk of condensation.
Reviews
There are no reviews yet.