EcoPro Ceiling Insulation Kit
EcoPro Ceiling Insulation Kit
Key Features
- Equivalent to around 100mm of fibre glass
- Thin and Flexible – Easy to Install
- Lightweight
- Can be used in joists as shallow as 50mm
- No harmful floating materials compared to traditional loft insulation
- Can be installed without raising your floor height
- Reflects 97% radiant energy back into your home
- Low Emissivity Foils
- UK Manufactured – Ecohome Insulation
Improve the Insulation in Your Home
Here at Multifoil Insulation, we have created the EcoPro Ceiling Insulation Kit which reflects 97% of radiant heat into your home, saving energy that would usually be lost with traditional insulation materials. It can also be used to prevent any issues with mould and dampness once the insulation is taped and sealed with the ThermaSeal Foil Joining Tape it’ll create a Vapour Control Barrier.
This kit has been designed to insulate a flat ceiling, it also has the added benefit of not needing to lower the ceiling height and lose valuable space. The insulation within the kit is EcoQuilt Expert which doesn’t contain harmful or itchy fibres. EcoQuilt Expert also won’t shrink over time, unlike traditional like Rockwool. EcoQuilt Expert is just 15mm thick in its open state, compresses to just 6mm, and is equivalent to around 100mm of fibreglass. Its shallow depth makes it easy to install even in small and tight spaces.
What’s Included in the EcoPro Ceiling Insulation Kit?
- EcoQuilt Expert 1.5m x 10m (15m²)
- ThermaSeal Foil Joining Tape 75mm x 50m
- Heavy Duty Staple Gun & 5,000 x 14mm Staples
- Cutting Knife with Extra Blades
The EcoPro Ceiling Insulation Kit is available for next working day delivery when ordered before 2 pm.
Spend over £500+Vat and receive this Staple Gun Kit and 5,000 Staples Free of Charge.
Also, all orders over £100+vat are delivered Free of Charge on a next working day delivery service.
| Length | 10m |
| Width | 1.5m |
| Thickness | 15mm (6mm Compressed) |
| Roll Coverage | 15m² |
| Layers | 6 |
| Weight | 5.5KG |
| Core R-value | 0.93m²K/W |
| Roof R-value | 1.83m²K/W |
| Wall R-value | 2.27m²K/W |
| Floor R-value | up to 5.56m²K/W |
| Foil Emissivity | 0.05 |
| Water Vapour Resistance | 600MNs/g |
Do I need any specific PPE to complete this job?
No, you don’t need any protective clothing, masks, or safety goggles as there are no harmful fibres in the insulation. However, if you’re removing any fibreglass before laying the multifoil insulation we do recommend using a mask and gloves because it can irritate your skin and lungs.
Can I double up on the insulation?
Yes, you can do 2 layers of insulation as long as you recess the first layer into the joists and staple it in place then layer the second layer over the top of the joists.
Do I need to batten over the top of the insulation?
Yes, you should always batten over the top, so the insulation has room to expand. It will also give you a solid structure to board over the insulation.
Do I need to tape and seal around the edges?
Yes, this is what helps it give the best thermal performance. It’ll stop any cold draughts from entering your home and prevent any warm air from escaping.
What’s the best way to cut the insulation?
The insulation is really easy to cut with a pair of scissors or a knife. If you look at the top of the website, there’s a section that says, ‘Things You’ll Need’ Here you can find our Multifoil insulation scissors.
Reviews
There are no reviews yet.